Vehicles
150 not categorized PORSCHE 356 B FRONT ENDCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.35271224 Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 GT3 & rs 07+ General Fitment911 GT3 2007-11
$11,481.74
Make a selection 91151192302EQ1 This gasket sits on the inside of the hood in the front trunk. It tends to get nicked and cut and will degrade with time. It is essential to keep moisture out of the trunk and should be replaced at the first signs of damage. This is a high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$136.40
Make a selection 35271223 Kw variant 3 coilover kit with front hls 2 lift system Porsche 997 turbo 07+ General Fitment911 TURBO/GT2 2007-09
$11,765.24
Make a selection 35271243 The hls provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. Kw hls is available as vehicle specific solution or individual conversion kit depending on the car model. General Fitment911 2009-12
$10,462.49
Make a selection 35271424 Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 GT3 & rs 07+ General Fitment911 GT3 2007-11
$13,371.74
Make a selection 35271415 Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 c2 05+ General Fitment911 2005-08
$12,143.24
Make a selection 478955425 Bosch micro edge wiper blades are designed for dependable wiping performance. Every blade incorporates a fully-enclosed metal tension spring and a precision cut natural rubber wiping element. That means premium wiping performance and crystal clear visibility for safer driving. And the exclusive Bosch directconnect™ one-step system makes installation quick and easy. 19 inch, fits front and rear, left and right. Sold each. View/Change Diagram
From $6.00
Make a selection 39071002 The new kw isuspension is state-of-the-art technology derived from motorsports competition for a more precise performance on the road. The kw ddc (dynamic dampening control) coilover with edc (electronic control unit) is one of the first aftermarket coil overs that offers an individual lowering in combination with an electronic damper setup. In addition to an adjustable suspension they now offer to adjust the setting of your suspension real time via iphone or ipad. After downloading the app, you can configure your suspension system individually wherever you are. It comes with three standard setups, which you can either choose via the ddc button in your car or the app on your mobile device. It offers comfort, sp...(choose a part on the right to read more) General Fitment911 2009-12
$8,032.49
Make a selection 90155590140 Since 1984, we have established an extensive network of interior specialty vendors that have stockpiled historically correct materials and have the skills necessary to reproduce to o.e. Specifications. This new a-pillar / front windshield frame trim in black leatherette is sourced in Germany. It consists of a 3-piece section that is pre-sewn for a seamless installation. Sold individually. 1 necessary per car. View/Change Diagram
From $111.10
Make a selection 7220140 The pro-kit is eibach;s premium suspension product and is considered to be one of the world;s top performance suspension products. The performance and reliability has been proven in millions of pro-kit spring sets sold in all five continents and in over more than 40 countries around the world. General Fitment911 TURBO/GT2 2007-09
$507.76
Make a selection 721414 The eibach pro-kit is the perfect answer for most frequently-driven street cars. Its eibachs legendary spring system that dramatically improves both a vehicles performance and appearance. Pro-kit lowers your cars center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. General Fitment911 1994-98911 TURBO/GT2 2001-05
$564.18
Make a selection 7219140 Pro-kit lowers your cars center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with plus-1 or plus-2 wheels and tires, the eibach pro-kit is the finishing touch to a winning recipe for performance. Pro-kit also reduces excessive fender-well clearance, making your car look just as hot as it performs. General FitmentCAYMAN 2006-08
$507.76
Make a selection 19271641 The hls provides additional road clearance for lowered vehicles. When expanded, a range of up to 45 mm of lift is produced, thereby helping sport cars avoid road clearance difficulties such as speed bumps, road construction, etc. Kw hls is available as vehicle specific solution or individual conversion kit depending on the car model. Hls is available in two different versions: hls 2 which is fitted to the front axle and hls 4 which can be attached to the front and rear axle and allows lifting the entire vehicle. The hydraulic cylinder unit is located on the coilover body between spring perch and spring. The advantage of a hydraulic system is that there is no compression (motion) of the extended cylinder unit (r...(choose a part on the right to read more) General Fitment911 GT3 2007-11
$7,060.49
Make a selection 90005300500 Porsche classic part 2 required this is an original ball-type bearing for the outer end of the early “small†25 mm spindle   it measures:  id 20 mm and od  52 mm  it’s marked 17304on the face of the inner ring  tip  -- don’t forget to have a set of front wheel bearings in your emergency travel parts kit  View/Change Diagram
From $16.92
Make a selection 90005900200 Note: early small spindle must use with 900-059-003-00 this is a tapered roller bearing for the outer end of both the early “small†25 mm spindle and later “large†30 mm spindle   it measures: id 20  and  od 52 mm  it’s marked 30304 on the face of the inner ring tip  -- don’t forget to have a set of front wheel bearings in your emergency travel parts kit  View/Change Diagram
From $16.92
Make a selection 91150332500 This seal sits on the trailing edge of the front fender at the top just below the windshield. It is also used under the back of the rear quarter panel where it meets the side panel. It is also used on the front bumper. We also recommend purchasing the upper seal, part # 91150332600 high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. View/Change Diagram
From $5.75
Make a selection 54097 Sport spring kits are h&r's number one selling product. Enhance the look of your vehicle with a reduced fender well gap. H&r sport springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing sport springs. Fun to drive, h&r sport springs are the number one upgrade for your vehicle. General Fitment911 2005-08
$451.35
Make a selection 91151192302EQ This gasket sits on the inside of the hood in the front trunk. It tends to get nicked and cut and will degrade with time. It is essential to keep moisture out of the trunk and should be replaced at the first signs of damage. Sold individually. 1 necessary per car.
$136.40
Make a selection 90150407900 Necessary to seal the torsion bar access cut out in front of the rear fender. Includes: qty. 1 torsion bar cover qty. 1 cover seal qty. 1 assembly bracket qty. 1 nut sold individually. 2 necessary per car. Please note: this fits all 911 models up to 1986. View/Change Diagram
From $9.37
Make a selection 91150531100 This seal tends to suffer from dry rot and degrades with time. Be sure to replace it before metal on metal contact occurs. Any of our OEM replacement parts are designed to appear and perform like the originals. We source these parts in Germany to ensure quality, reliability and precise fitment. When servicing the bumpers, we recommend replacing the front bumper seal, part # 91150518701 shock bushings, part # 91150522100 and base, part # 91150522001 sold individually. 4 necessary per car. View/Change Diagram
From $6.60
Make a selection 35271423 Kw variant 3 coilover kit with front & rear hls 4 lift system Porsche 997 turbo 07+ General Fitment911 TURBO/GT2 2007-09
$13,655.24
Make a selection 91450108320 Now a solution to the rusted rear trunk floor! Most 914 trunk floors by now have rusted from years of taillight leaks. Our repair panel is everything you need for a perfect factory repair without purchasing the $2100.00 factory assembly! It is large enough that it extends in front of the brace. General Fitment914 1970-76
$185.00
Make a selection BAT002 Many pre. 1977 Porsche 911's are not equipped with factory oil plumbing (hard lines and thermostat). In this case fitting an oil cooler requires making a hose run from the rear to the front of the vehicle and back. We find the easiest and most cost effective method of plumbing is to duplicate the factory plumbing route using aeroquip hose and fittings with a mocal oil thermostat and oil cooler. The various kits that we offer to accomplish this task include; one of a number of oil cooler options (some are suitable for both fender or front spoiler location), mocal -12 an oil thermostat with mounting bracket, 30 foot length of aqp -12 an stainless braid 3/4" id hose, 30mm metric to -12 an adaptors for the oil ta...(choose a part on the right to read more) General Fitment911 1974-77911 1965-69 911 1970-73
$925.00
Make a selection 935FSUSP This light weight, bolt in kit replaces the factory front suspension arms, cross-member, and rubber bushings when converting to a coil over front suspension system. General Fitment911 1965-69911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 914 1970-76
$1,850.00
Make a selection 96450412301 This gasket sits on the inside of the hood in the front trunk. It tends to get nicked and cut and will degrade with time. It is essential to keep moisture out of the cabin and should be replaced at the first signs of damage. Sold individually. 1 necessary per car. View/Change Diagram
From $35.86
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |